Well integrity and temperature determine whether a well can be converted to geothermal
Technical criteria covering integrity, bottomhole temperature and flow rate determine whether an inactive oil well can generate geothermal energy; Mexico is evaluating 187 fields.

A depleted oil well retains access to a formation with usable heat, but converting it to geothermal depends on the integrity of the casing and cement, the bottomhole temperature and a sustainable flow rate, according to a technical analysis published on November 19, 2026 by Inspenet. A high temperature is not enough: without circulation there is no usable power.
In Mexico, the Mexican Institute of Petroleum (IMP) reported on September 2, 2026 that it had analyzed 187 oil fields: 78 record temperatures of 90 °C or more, and 39 onshore fields proved highly viable for converting wells. Five wells with bottomhole temperatures above 140 °C were selected for power generation tests using an organic Rankine cycle (ORC), in a project with Pemex, the National Autonomous University of Mexico (UNAM) and the National Institute of Electricity and Clean Energy (INEEL). Drilling accounts for more than half the investment in a conventional geothermal project, according to the IMP itself.
The push is also advancing in Texas. On November 9, 2026, HB 502 was introduced in the Texas House of Representatives, requesting that the Railroad Commission of Texas (RRC) conduct a feasibility study on converting abandoned or inactive wells in Bexar County, where San Antonio is located, into geothermal production.
The analysis distinguishes thermal coproduction in active wells with a high water cut, open loops and closed loops. In coproduction, the potential depends on the volume, temperature and continuity of the produced water. In open loops, permeability and hydraulic connectivity determine the capacity to extract and reinject fluid. In closed loops, the well operates as a coaxial heat exchanger, and insulation of the inner pipe prevents heat loss in the downward flow. The integrity review requires acoustic cement bond logs (CBL/VDL), casing evaluation and pressure tests, under the framework of the ISO 16530-1 standard.
A numerical model published in Renewable Energy Focus reported average temperatures of 160 °C and 150 °C between 4,000 and 4,500 meters depth in two pairs of wells separated by 360 and 430 meters. The work concluded that direct thermal use is feasible; petrothermal conversion requires geomechanical and mechanical integrity analysis.
The next milestone is the ORC tests in the five Mexican wells, whose results will indicate whether the inactive inventory translates into firm capacity. In Texas, the legislative record shows that HB 502 is still at the introduction stage.
This article was drafted with the assistance of artificial intelligence from verified sources and reviewed by a human editor before publication.
Sources
- Geotermia en pozos petroleros: Criterios para reutilizar infraestructura
- Encuentro internacional reúne a Gobierno, industria y academia para impulsar la geotermia
- HB 502, 90th Legislature, Regular Session
- Numerical evaluation of hydrocarbon wells for geothermal utilization: a model for renewable energy transition and environmental sustainability in Mexico
Related stories
This article was drafted with AI assistance from verified sources and reviewed by a human editor before publication.
← All news